Important notice to all ECDIS customers

 

From January 2014 the latest version of the IHO standard (S-63 Edition 1.1) will become compulsory.

The permit file version number will change and all ECDIS users must use a new certificate file (IHO.CRT instead of PRIMAR.CRT) to authenticate ENC data. If the ECDIS has not been upgraded to S-63 Edition 1.1 by January 2014, they will no longer meet the IHO standards and therefore no longer be compliant.

What does this mean for the JRC ECDIS?
If you have installed the software on the ECDIS models mentioned below you automatically comply with the new S-63 1.1 standard. Please carefully check during installation if the ECDIS has the latest software installed. Legacy JRC ECDIS models not listed will not support the new S-63 1.1 standard.

 

Software upgrade of JRC Electronic Chart Display and Information System (ECDIS).
(Not applicable for ARCS).

 

 

 

 

 

 

 
This information is to advise customers to arrange and complete necessary JRC ECDIS software upgrade as soon as possible.

In accordance with IMO SN. 1/Circ. 266/Rev.1 and IHO ENC/ECDIS DATA PRESENTATION AND PERFORMANCE CHECK FOR SHIPS, latest software upgrade is highly recommended by IMO and IHO if ECDIS is used as a primary means of navigation.

ECDIS which are not upgraded to the latest version of the ECDIS Product Specification or the S-52 Presentation Library may be unable to correctly display the latest charted features.

Please check the software version in the appropriate ECDIS model instruction manual and arrange to upgrade to the latest software, if the installed software version of the ECDIS is earlier than the following versions. Please use paper charts until software is upgraded to the latest versions.

 

 

Info
The 2.6.0.8A software update is applicable for "M-type" ECDIS models JAN-901M/901/701, NDC-1186-3xx with a file size of 50 MB.

Notice
  • If the software version of your ECDIS is mentioned on this list, software upgrade shall be done by JRC service engineer.
  • Download the files by using PC completed virus check.
  • If you try to update ECDIS software, carry out during anchoring.
  • Estimated minimum time for updating software is about 10 minutes.
  • Estimated time for installing ENC charts: maximum 10 hours (1 CD)
  • After updating, fill in the update result to request for sending of software update result and send it by an e-mail or a fax.
  • In case of inquiries about updating and applications for arranging service engineer, click here.
  • If the software version is earlier than V2.5.2.2 and/or V3.5.2.1, indication of "display panel" will be changed. For details, click here.
  • Please refer to this procedure when you write software on CD-ROM.


Manuals
Confirmation of software version English | 日本語
Software update manual English | 日本語

Download



 

 

Info
The V56C software update is applicable for "B-type" ECDIS models JAN-901B/701B/2000/1186, NDC-1186-4xx with a file size of 108 MB.

Notice
  • Download the files by using PC completed virus check.
  • If you try to update ECDIS software, carry out during anchoring.
  • After updating, it is necessary to re-install the charts. (No need to re-install ENC charts for newer than 52A)
  • Estimated minimum time for updating software is about 10 minutes. Refer to the software update manual in detail.
  • Estimated time for installing ENC charts: maximum 13 hours (9 CDs: the whole world)
  • After updating, fill in the update result to request for sending of software update result and send it by an e-mail or a fax.
  • In case of inquiries about updating and applications for arranging service engineer, click here.
  • In the case of Jeppesen/C-Map ENC user implemented V56C, please download the revised manual because the installation procedure of chart is different than previous.
In case of AIO service user, please download and install the software patch for V56C.
A temporary patch is available in case it is required to send via email.

Manuals
Confirmation of software version English | 日本語
Software update manual (for version 42A or earlier) English | 日本語
Software update manual (for version 50) English | 日本語
Software update manual (for version 51 - 54) English | 日本語
Software update manual (for version 55 or later) English | 日本語
Revised manual for chart installation English | 日本語
Software patch installation manual for V56C English | 日本語
Temporary software patch installation manual English | 日本語

Download



The procedure of confirming ECDIS serial number is here.